ion implantation parts47 - Ajmer

Product Name:ion implantation parts

Product Description:1. Product name: Ion Implantation Spare Parts Ion implantation technology is a pure surface treatment technology, it does not need to be carried out in a high temperature environment, so it will not change the shape and surface finish of the workpiece. Magotan can provide tungsten ion implantation spare parts and molybdenum ion implantation spare parts. 3. The method of ion implantation is to accelerate impurity ions in a vacuum and low temperature (for Si, voltage ?105 V), and the impurity ions with large kinetic energy can directly enter the semiconductor; at the same time, some lattices will also be generated in the semiconductor. Therefore, low-temperature annealing or laser annealing is required to eliminate these defects after ion implantation. The impurity concentration distribution of ion implantation generally exhibits a Gaussian distribution, and the highest concentration is not at the surface, but at a certain depth within the surface. Applications of ion implantation components: (1) ion implanter (2) semiconductor equipments 3.1 The advantage of ion implantation is that it can precisely control the total dose, depth distribution, and surface uniformity of impurities, it is a low-temperature process (to prevent the re-diffusion of the original impurities, etc.), and it can realize self-alignment technology (to reduce capacitance effects). 3.2 In the process flow, the next step in lithography is etching or ion implantation. During ion implantation, where there is photoresist protection, the ion beam cannot penetrate the photoresist; where there is no photoresist, the ion beam can be implanted into the substrate to achieve doping. Therefore, the photoresist used in the ion implantation process must be able to effectively block the ion beam. 3.3 In the front-end manufacturing process of integrated circuits, there are many photolithography layers followed by ion implantation. These photolithography layers are called ion implantation layers. After the ion implantation is completed, the photoresist on the surface of the wafer must be removed. Removing the photoresist after ion implantation is a difficult point in the photolithography process. Requirements for the removal process include: (1) Cleanly and thoroughly remove the photoresist on the substrate; (2) Try to avoid damage to the surface of the substrate, especially the ion implantation area (that is, the area without a photoresist); (3) Try to avoid damage to the device (such as the metal of the gate). 4. The ion implanter is also a key device in the pre-fabrication process of integrated circuits. In order to change the carrier concentration and conductivity type, the semiconductor needs to dope the area near the semiconductor surface. Compared with the conventional thermal doping process, ion implantation can improve the implantation dose, The implantation angle, implantation depth, lateral diffusion, and other aspects are precisely controlled so that ion implantation is widely used in semiconductor manufacturing.

Price:10.00

Product Website: http://www.mtionsource.com

Company Description: Baoji Magotan Nonferrous Metals Co., Ltd

Address: ShaanxiShaanxiBaojiWeibinBaoTi Rd, Weibin District, Baoji, Shaanxi, China721013

Descption: Our Factory Baoji Magotan Nonferrous Metals Co., Ltd with a registered capital of RMB 5 million, is located in BaoTi Industrial Park, BaoTi Road, Baoji, Shaanxi Province. Magotan covers an area of more than 3,000 square meters and has 50+ employees. Our equipment includes 6 CNC and CNC lathes, 2 surface grinders, 1 cylindrical grinder, 3 heat treatment furnaces, and more than 10 wire cutting, and laser cutting machines. One two-bar 550 rolling mills, one four-bar 650 rolling mills, one press machine, and one laser marking machine.

Registered Capital: 100

EmployeeNum: 100

Contact: Fiona Zhao

Telphone: 86-0917-3229939

Fax: 86-0917-3229939

Email: 81463350@aliyun.com

Company Website: https://www.mtionsource.com